Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Oxygen Sensor: Service and Repair
REMOVAL
Oxygen Sensor
1. Disconnect the battery ground cable.
2. Disconnect harness terminal.
3. Remove sensor with suitable socket or wrench.
INSTALLATION
1. Apply a thin coating of anti-seize compound to the threads.
NOTE: Do not contaminate sensing tip with compound.
2. Install sensor and torque it to 50-60 Nm (37-44 ft lb).
3. Apply a thin coating of dielectric compound to the connector.
4. Connect harness terminal.
5. Connect the battery ground cable.
