Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
6. Inspect the MAF sensor housing screen for holes. If torn, replace the housing.
INSTALLATION
To install, reverse the removal procedure.
-
Tighten the MAF sensor screws to: 8-10 Nm. (71-88 lb.in)
6. Inspect the MAF sensor housing screen for holes. If torn, replace the housing.
INSTALLATION
To install, reverse the removal procedure.
-
Tighten the MAF sensor screws to: 8-10 Nm. (71-88 lb.in)