mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

TP Sensor - MIL ON/Codes Stored/No Driveability Concerns|Page 4399 > < TP Sensor - MIL ON/Codes Stored/No Driveability Concerns|Page 4393
Page 1
background image

Throttle Position Sensor: Customer Interest
TP Sensor - MIL ON/Codes Stored/No Driveability Concerns

Article No.
98-18-4

09/14/98

^

MALFUNCTION INDICATOR LAMP (MIL) - MIL
ILLUMINATED WITH DIAGNOSTIC TROUBLE 
CODES (DTCS) P0120, P0510, P0731, P0732,
AND/OR P0733 STORED IN MEMORY WITH NO
DRIVEABILITY CONCERNS PRESENT

^

LAMP - MALFUNCTION INDICATOR LAMP (MIL)
ILLUMINATED WITH DIAGNOSTIC TROUBLE 
CODES (DTCS) P0120, P0510, P0731, P0732,
AND/OR P0733 STORED IN MEMORY WITH NO
DRIVEABILITY CONCERNS PRESENT

LIGHT TRUCK: 
1996-97 VILLAGER

This TSB article is being republished in its entirety to include Emission Warranty Coverage.

ISSUE

The Malfunction Indicator Lamp (MIL) may illuminate and Diagnostic Trouble Codes (DTCs) P0120, P0510, P0731, P0732, and/or P0733 may be
stored in memory with no driveability/transaxle shifting concerns. This may be caused by the Throttle Position (TP) sensor. During coastdown from
above 64 km/h (40 mph), the idle switch is on indicating a closed throttle valve and the Transaxle Control Module (TCM) senses a TP voltage increase.
This process, along with a decrease in engine rpm and vehicle speed, may trigger/set the code. These codes may be stored with no driveability or
automatic transaxle shift quality concerns.

ACTION

Replace the TP sensor with a revised TP sensor. Refer to the following Service Procedure for details.

SERVICE PROCEDURE

1.

Remove the TP sensor following the procedure in the 1997 Villager Service Manual, Section 03-14.

2.

Install the revised TP sensor and adjust the output voltage of the TP sensor with the throttle fully closed following the procedure in Section 03-14
of the Service Manual.

PART NUMBER

PART NAME

F6XZ-9B989-BA

Throttle Position (TP) Sensor

OTHER APPLICABLE ARTICLES: NONE

SUPERSEDES: 98-16-14

WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage And Emission Warranty

OPERATION

DESCRIPTION

TIME

981804A

Replace Throttle Position

0.4 Hr.

(TP) Sensor And Adjust
Output Voltage

DEALER CODING

CONDITION

BASIC PART NO.

CODE

9B989

42

OASIS CODES:206000, 501000, 502000, 503000, 

TP Sensor - MIL ON/Codes Stored/No Driveability Concerns|Page 4399 > < TP Sensor - MIL ON/Codes Stored/No Driveability Concerns|Page 4393