Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
REMOVAL
1. Drain the coolant below the level of the Engine Coolant Temperature (ECT) sensor.
2. Disconnect the ECT electrical connector.
3. Use a deep well socket to remove the ECT sensor from the intake manifold coolant outlet.
INSTALLATION
1. To install, reverse the removal procedure.
2. Tighten the ECT sensor to 15-20 Nm (11-14 ft lb).
3. Fill the cooling system.
