Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Knock Sensor: Description and Operation
Knock Sensor
PURPOSE
The Knock Sensor (KS) detects engine knocking conditions and sends a signal to the Powertrain Control Module (PCM). The PCM then retards the
ignition timing to compensate for the condition
OPERATION
If a knocking vibration from the engine block occurs, its pressure is applied to the piezoelectric element of the KS. This vibrational pressure is then
converted into a voltage signal which is delivered to the PCM. The KS is attached to the engine block between the cylinder banks. The Malfunction
Indicator Lamp (MIL) will not be illuminated for a KS malfunction.
