Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Ignition Rotor: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the distributor cover.
3. Loosen the three distributor cap screws and position the distributor cap, distributor to spark plug wires, and ignition coil to distributor high tension
wiring out of the way.
4. Remove the rotor bolt.
5. Remove the distributor rotor.
INSTALLATION
To install, reverse the removal procedure.
-
Tighten the rotor bolt to 1 Nm (9 lb- in).
