Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Idle Speed: Adjustments
With New Generation Star (NGS) Tester
1. Connect Rotunda New Generation STAR (NGS) Tester 007-00500 or equivalent with software version greater than 8.0 to the Data Link
Connector (DLC) located under the LH side of the instrument panel, below the interior fuse junction panel and to the cigar lighter.
2. Start the engine.
3. Select VEHICLE & ENGINE SELECTION.
4. Select SELECT NEW VEHICLE YEAR & MODEL.
5. Select Applicable Year Model [1]
6. Select Applicable Engine and: MFI VILLAGER.
7. Select DIAGNOSTIC DATA LINK mode.
8. Select PCM - POWERTRAIN CTRL MODULE.
9. Select WORK SUPPORT mode.
10. Select IAC VALVE ADJUST.
11. Press TRIGGER TO START.
12. If the engine speed (rpm) does not drop to between 650-750 rpm, adjust the idle speed by turning the idle speed adjusting screw.
13. Disconnect the Rotunda NGS Tester.
[1] 10th digit of V.I.N.
