Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Ignition Cable: Testing and Inspection
NOTE: When removing the spark plug wires from the distributor cap, grasp the spark plug wire boot by hand, and remove it with a twisting and
pulling motion. Do not pull on the spark plug wire.
Ignition Wire Visual Inspection
1. Visually inspect the ignition wires for the following:
a. Insulation for swelling or breakdown due to fuel, oil, grease, etc.
b. Insulation for cracks or breaks.
c. Insulator boots for swelling or breakdown due to fuel, oil, grease, etc.
d. Insulator boots for cracks or breaks.
e. Terminal ends for corrosion, cracks or looseness.