Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
INSTALLATION
1. Position the anti-lock brake control module in the vehicle.
CAUTION: Electronic modules are sensitive to static electrical charges. If the module is exposed to these charges, damage may result.
2. Install the three anti-lock brake control module screws in the module bracket.
3. Connect the surrounding anti-lock brake control module electrical harness connectors.
4. Connect the anti-lock brake control module electrical harness connector.
5. Position the timer module and install the three timer module screws.
6. Connect the foot lamp electrical connectors, if equipped.
7. Install the RH instrument panel lower cover and LH instrument panel lower cover.
8. Install the storage bin.
9. Connect the battery ground cable.
