Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Wiper Control Module: Service and Repair
Rear Window Wiper Governor
Without Opening Back Window Glass
REMOVAL
NOTE: The rear window wiper governor is installed on these vehicles only.
1. Use a screwdriver to remove the rear utility tray beverage holder from the LH quarter trim panel.
2. Disconnect the rear window wiper governor electrical connector.
3. Remove the two rear window wiper governor screws and remove the rear window wiper governor through the opening.
INSTALLATION
1. To install, reverse the removal procedure.
With Opening Back Window Glass
REMOVAL