Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Headlamp Switch: Service and Repair
Autolamp/Light Switch Rheostat Resistor Assembly
REMOVAL
1. Disconnect the battery ground cable.
2. Pull the headlamp switch/autolamp/light switch rheostat resistor assembly from the instrument panel finish panel.
3. Disconnect the autolamp/light switch rheostat resistor assembly electrical connector.
4. Disconnect the headlamp switch electrical connector.
5. Remove the two autolamp/light switch rheostat resistor assembly screws. Remove the autolamp/light switch rheostat resistor assembly from the
headlamp switch/autolamp/light switch rheostat resistor assembly.
INSTALLATION
1. To install, reverse the removal procedure.
