Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
12.
Position the new negative cable and engage the plastic retainer, then install the retainer nut and the bolt.
13.
Install air cleaner assembly body and retaining bolts.
14.
Install filter.
15.
Install the air cleaner assembly cover. Engage cover retainer clamps, connect MAF sensor connector and tighten air tube clamp.
16.
Install the battery and battery hold down bolt.
17.
Install battery cover.
18.
Connect both positive and negative battery cables then remove the memory saver.