Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Power Steering Fluid Reservoir: Service and Repair
REMOVAL
1. Place a drain pan under the power steering oil reservoir.
2. Loosen the reservoir return hose clamp at the power steering oil reservoir.
3. Remove the reservoir return hose and move it up and out of the way.
4. Loosen the power steering reservoir pump hose clamp at the power steering oil reservoir.
5. Remove the power steering reservoir pump hose from the power steering oil reservoir and move the power steering reservoir pump hose up and
out of the way.
6. Drain the power steering oil reservoir.
7. Slide the power steering oil reservoir up and out of its mounting bracket and remove it from the vehicle.
INSTALLATION
1. To install, reverse the removal procedure.
