Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
2. Raise and support the vehicle.
3. Install the lower steering column shaft clamp bolt. Tighten the lower steering column shaft clamp bolt to 24-29 Nm (17-22 ft. lbs.).
4. Lower the lower steering column shaft dust boot into position on the steering gear.
5. Lower the vehicle.
6. Position the steering column opening cover over the lower steering column shaft and against the bulkhead.
7. Install the three steering column opening cover nuts. Tighten the three steering column opening cover nuts to 24-29 Nm (17-22 ft. lbs.).
8. Install the steering column.
