Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
2. Slide the front suspension bumper on the front shock absorber.
3. Use Rotunda Strut Spring Compressor Master Set 014-00781, or equivalent, to compress the front coil spring.
4. Install the front coil spring on the front shock absorber with the end of the front coil spring in the lower front coil spring seat indentation.
5. If removed, install the dust boot on the upper front cold spring seat.
6. Install the upper front coil spring seat and dust boot on the front shock absorber.
7. Install the front shock absorber bearing seat.
