Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
ASSEMBLY
1. Position Anti-Lock Sensing Ring Remover T85P-20202-A on the front disc brake rotor shield and Dust Shield Replacer T87C- 1175-B under the
front wheel knuckle. Press a new front disc brake rotor shield onto the front wheel knuckle.
2. Reassemble the front wheel bearing inner and outer races.
3. Support the front wheel knuckle and using Step Plate Adapter D80L-630-10 (part of D80L-630-A), press the front wheel bearing into the front
wheel knuckle.
4. Install the snap ring.
5. Support the front wheel bearing inner race and using Bearing Cup Replacer T80T-4000-P and Driver Handle T80T-4000-W, press the front wheel
hub into the front wheel knuckle and front wheel bearing assembly.
6. Install the wheel hub, wheel knuckle and wheel bearing as an assembly.
