Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Wheel Bearing: Service and Repair
Installation
1. Position the front wheel hub, front wheel knuckle and front wheel bearing as an assembly on the front wheel driveshaft and joint.
2. Install the front wheel knuckle into the front shock absorber.
3. Install the two front shock absorber-to-front wheel knuckle bolts.
4. Install the two front shock absorber-to-front wheel knuckle nuts. Tighten the front shock absorber-to-front wheel knuckle nuts to 127-147 Nm
(94-108 ft. lbs.).
5. Install the front brake anti-lock sensor bolt. Tighten the front brake anti-lock sensor bolt to 1.8 to 2.4 Nm (16-21 inch lbs.).
6. Install the tie rod end in the-front wheel knuckle.
