Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
4. Remove the wheel and disc brake caliper. Hang the disc brake caliper from the front coil spring using a cord or piece of wire.
5. Remove the front disc brake rotor. Position Dial Indicator with Bracketry Tool-4201-C, or equivalent, against the wheel hub, then push and pull
the wheel hub. Measure the end play of the wheel hub and front wheel bearing assembly. If the end play exceeds the specified limit, replace the
bearings. The maximum allowable end play is 0.05 mm (0.002 inch).
