mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Band Apply Servo, A/T|Removal and Installation|Page 4767 > < Band Apply Servo, A/T|Removal and Installation|Page 4765
Page 4
background image

10. Check the piston, retainer and spring for abnormal wear or damage.

11. Check the fourth apply piston return spring, and the second apply piston return spring for damage or deformation.

Valve Spring Length Chart

12. Measure the free length of the second apply piston return spring.
13. The second apply piston return spring free length should measure 32.5 mm (1.280 inch). If the second apply piston return spring is out of

specification, replace the second apply piston return spring.

NOTE:  When measuring the springs, always measure at the outermost point of the end coils.

14. Measure the diameter of the second apply piston return spring.

Band Apply Servo, A/T|Removal and Installation|Page 4767 > < Band Apply Servo, A/T|Removal and Installation|Page 4765