Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Reduction Gear: Service and Repair
DISASSEMBLY
CAUTION: Reduction gear disassembly should occur only if the following conditions are present:
-
Abnormal noise.
-
Abnormal gear wear.
-
Faulty bearings.
1. Use a hydraulic press and Bearing Pulling Attachment D84L-1123-A or equivalent to remove the reduction gear bearing from the reduction gear.
Discard the reduction gear bearing.
2. Inspect the reduction gear components.
ASSEMBLY
1. Use a hydraulic press and Step Plate Adapter D80L-630-5 or equivalent, to install the new reduction gear bearing onto the reduction gear.
