Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
10. Use a small screwdriver to disengage the shift cable locking pin.
11. Remove the shift cable and bracket from the transmission shift cable bracket.
12. Pull the end of the shift cable and bracket from the Transmission Range (TR) switch.
13. Pull the shift cable and bracket from the steering actuator housing end to remove the shift cable and bracket from the vehicle.
INSTALLATION
1. Reverse procedure to install.
2. Adjust the shift cable and tighten the parking brake pedal assembly nuts and bolts to 8-11 Nm (71-97 inch lbs.).
