Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
2. Remove valve body bolts d and the oil filter from the main control valve body.
3. Remove valve body bolts c and valve body bolts a from the Shift Solenoid (SS) assembly.
NOTE: The SS assembly, line pressure solenoid valve and Transaxle Fluid Temperature (TFT) sensor are hard-wired into the valve body wiring
harness and are serviced as an assembly with the valve body wiring harness.
4. Remove the line pressure solenoid valve bolt and the SS assembly from the main control valve body.