Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
6. Use the reamer bolts as a guide to place the intermediate control valve body onto the upper control valve body.
7. install the valve body check balls and the line pressure relief valve springs into the lower control valve body.
8. Combine the lower separating gasket, the separating plate and the lower intermediate separating gasket.
9. Insert valve body bolts e to the bottom of the lower control valve body, then place the separating gaskets and plate onto the lower control valve
body.
10. Install the accumulator support plates onto the lower control valve body.
11. Install the lower control valve body onto the intermediate valve body.
