Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Heated Glass Element Switch: Testing and Inspection
1. Key OFF.
2. Disconnect the heated back window switch connector.
3. Using a jumper, connect Terminal 5 of the heated back window switch to the battery positive terminal.
4. Temporarily connect Terminal 2 of the heated back window switch to the battery negative terminal. The LED should come on when the battery
negative terminal is connected to Terminal 2.
5. Disconnect the battery terminals.
6. Measure the resistance between Terminals 4 and 6 while activating the heated back window switch.
Heated Sack Window Switch
Resistance
Position
Released
Greater than 10,000 ohms
Depressed
Less than 5 ohms
7. If the heated back window switch does not operate as specified, replace the heated back window switch and light. Otherwise, return to Pinpoint
Tests. See: Windows/Testing and Inspection/Pinpoint Tests
