Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Back Window Glass Weatherstrip: Service and Repair
REMOVAL
1. Remove the upper and side trim panels from around the opening back window glass.
2. Remove the opening back window latch.
3. Support the opening back window glass with a prop.
4. Use a screwdriver to pry the clip from each opening back window glass support.
5. Pull the opening back window glass support from the opening back window glass.
6. Pull the one-piece weatherstrip from the opening back window glass flange.
INSTALLATION
1. To install, reverse the removal procedure.
