Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Wiper Arm: Adjustments
Rear Window Wiper Arm Park Position
1. Depress the locking clip on the inside base of the rear window wiper pivot arm and remove the rear window wiper pivot arm and rear window
wiper blade assembly.
2. Depress the rear window wiper switch and allow the rear window wiper motor to move the rear window wiper motor shaft through three or four
cycles. Turn off the rear window wiper switch.
3. For models equipped with fixed or opening back window glass, adjust the rear window wiper pivot arm and rear window wiper blade assembly so
that the rear window wiper blade along the inside edge of the blackout ceramic coating, 30 mm (1.2 inches) from the bottom of the back window
glass.
