Villager V6-201 3.3L SOHC VIN T SFI (1999)
Harness And Secure Wire
Harness With Tie Strap) -
Both Doors
011808C
Adjust Bellcrank And
1.8 Hrs.
Replace Window Switch
(Includes Time To Discard
Wire Connector, Seal
Exposed Wire Ends,
Repair Wire Harness And
Secure Harness With Tie
Strap, Inspect, Replace
And Reprogram
Transmitters) - Both Doors
011808D
Adjust Bellcrank And
0.9 Hr.
Replace Window Switch
(Includes Time To Discard
Wire Connector, Seal
Exposed Wire Ends,
Inspect, And Replace
Keyless Entry
Transmitters) (Includes
Time To Reprogram New
Transmitters) - Both Doors
DEALER CODING
CONDITION
BASIC PART NO.
CODE
15K601
01
OASIS CODES: 102000, 112000, 201000, 203000, 203200, 205000, 206000
Service Procedure
1.
Remove a front door trim panel by referring to the appropriate year Villager Workshop Manual, Section 501-05.
2.
Position the watershield aside.
3.
Loosen the lock rod bellcrank bolt (Figure 1).
4.
Engage the front door latch into the closed position by closing the door or by manually closing the latch.
5.
Manually lock the front door latch with the actuating rod.