Villager V6-201 3.3L SOHC VIN T SFI (1999)
3. Close the LH second row D-ring cover.
4. Install the RH C-pillar trim panel.
^
On the RH C-pillar trim panel, install the three pin-type retainers.
NOTE: Position the door opening weatherstrip over the C-pillar trim panel.
5. On the RH C-pillar trim panel, install the second row RH D-ring.
^
Using the special tool, install the bolt.
6. On the RH C-pillar trim panel, close the second row RH D-ring cover.
