Villager V6-201 3.3L SOHC VIN T SFI (1999)
Trunk / Liftgate Lock Cylinder: Service and Repair
REMOVAL
NOTE: Individual lock cylinders are repaired by discarding the inoperative lock cylinder and building a new lock cylinder using the appropriate lock
repair package. The lock repair package includes a detailed instruction sheet to build the new lock cylinder to the current key code of the vehicle.
1. Remove the liftgate trim panel.
2. Remove the watershield.
3. Position the liftgate disarm switch aside.
1
Remove the E-clip.
2
Remove the liftgate lock cylinder arm.
3
Position the liftgate disarm switch aside.
4. Remove the liftgate lock cylinder.
1
Remove the clip.
2
Remove the liftgate lock cylinder.
INSTALLATION
1. To install, reverse the removal procedure.