Villager V6-201 3.3L SOHC VIN T SFI (1999)
Power Seat Switch: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the power seat switch buttons.
3. Remove the outboard seat cushion trim cover.
1
Remove the screws.
2
Remove the outboard seat cushion trim cover.
4. Remove the power seat switch.
1
Disconnect the electrical connector.
2
Remove the screws.
3
Remove the power seat switch.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: when the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.
