Villager V6-201 3.3L SOHC VIN T SFI (1999)
4. Remove the front disc brake caliper rubber insulators.
5. Position shop towels between the front disc brake caliper and the front disc brake caliper piston.
6. WARNING: Do not use an excessive amount of air pressure to remove the caliper piston. Excessive pressure can force the caliper piston
out of the front disc brake caliper bore with enough force to cause personal injury. Never attempt to catch the caliper piston by hand as it
comes out of the front disc brake caliper bore.
WARNING: Apply only enough air pressure to ease the front disc brake caliper piston out of the front disc brake caliper.
NOTE: Make sure the bleeder screw is closed while removing the front disc brake caliper piston.
Apply air pressure through the brake hose fitting to remove the front disc brake caliper piston.
7. CAUTION: Use a plastic or wooden pick to remove the piston seal. Do not use a metal tool. A metal tool can scratch or nick the piston seal
