Villager V6-201 3.3L SOHC VIN T SFI (1999)
1. CAUTION: Do not reuse hose clamps. Make sure new hose clamps are seated correctly.
NOTE: Make sure the thermostat housing and mating surface are clean of dirt and old silicone.
NOTE: Apply a 2.0 - 3.0 mm (0.079 - 0.118 inch) bead of Silicone Gasket and Sealant F7AZ-19554-EA or equivalent meeting Ford specification
WSK-M2G343-A4 to the mounting surface of the water pump.
To install, reverse the removal procedure.
