mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Audible Warning Device|Testing and Inspection > < Speed Control Actuator Switch, Instrument Panel|Page 8118
Page 1
background image

Audible Warning Device: Description and Operation

The warning device (chimes) system consists of the following components:

-

key-in ignition warning switch.

-

driver and passenger door ajar switches.

-

RH and LH sliding door ajar switches.

-

liftgate ajar switches (part of the latch assembly).

-

SEC/timer module.

PRINCIPLES OF OPERATION

Safety Belt Warning Chime
The safety belt warning chime is controlled by the Smart Entry Control (SEC)/timer module. When the driver safety belt is not fastened, the safety
belt warning switch is closed, completing a ground to the safety belt warning input of the SEC/timer module. When the ignition is rotated to the
RUN position, the SEC/timer module will sound the safety belt warning chime for 6 seconds, or until the safety belt is fastened.

Key-In Ignition Warning Chime
The key-in ignition warning chime is controlled by the gauges and warning devices (non integral to the cluster) SEC/timer module. When the
ignition key is in the ignition switch, and the ignition switch is in the OFF or ACCY position, the key-in ignition warning switch is closed,
completing a ground to the key is in the ignition warning input of the SEC/timer module. When the driver door is opened, the door ajar warning
switch is closed, completing a ground to the door ajar warning input of the SEC/timer module, the SEC/timer module will then sound the key-in
ignition warning chime until either the driver door is closed, or the ignition key is removed from the ignition switch.

Headlamp-On Reminder Chime
The headlamp-on warning chime is controlled by the SEC/timer module. When the headlamp switch is in the headlamp, or park lamp position, the
SEC/timer module headlamp-on warning chime input receives a 12 volt signal from the headlamp switch. If the driver door is opened, the door
ajar warning switch is closed, completing a ground to the door ajar warning input of the SEC/timer module. Provided that the ignition key is not in
the ignition, the headlamp-on warning chime will sound until the headlamps are turned OFF, or the driver door is closed.

Audible Warning Device|Testing and Inspection > < Speed Control Actuator Switch, Instrument Panel|Page 8118