Villager V6-201 3.3L SOHC VIN T SFI (1999)
2. Connect the TR sensor.
1
Tighten the bolts.
2
Install the shifter cable nut.
3
Connect the electrical connector.
4
Remove the special tool.
3. Install the engine splash shield.
4. Lower the vehicle.
5. NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.
Connect the battery ground cable.