Villager V6-201 3.3L SOHC VIN T SFI (1999)
6. Remove the rotor.
^
Remove the screw.
INSTALLATION
NOTE: If the crankshaft is rotated during distributor removal, rotate the crankshaft until the No.1 piston is at TDC on the compression stroke.
1. Install the rotor.
^
Install the screw.
2. Align the mark on the distributor shaft with the protruding mark on the distributor housing.
3. Install the distributor assembly.
1
Install the distributor.
2
Connect the electrical connector.
3
Connect and clip the electrical connector.
4
Install the bolt.