Villager V6-201 3.3L SOHC VIN T SFI (1999)
Headlamp Switch: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Position the headlamp switch panel aside.
3. Remove the headlamp switch panel.
1
Disconnect the connectors.
2
Remove the headlamp switch panel.
4. Remove the headlamp switch.
1
Remove the screws.
2
Remove the headlamp switch.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.
