Villager V6-201 3.3L SOHC VIN T SFI (1999)
Knock Sensor: Service and Repair
Knock Sensor
Removal
1. Remove the intake manifold.
2. Disconnect the heater core hose from the coolant tube.
a. Release the clamp.
b. Disconnect the hose.
3. Release the clamp and remove the lower radiator hose from the coolant tube.
4. Remove the water bypass hose from the thermostat housing
a. Release the clamp.
b. Remove the hose.
5. Remove the coolant crossover tube.
a. Remove the bolt
b. Remove the tube.