Villager V6-201 3.3L SOHC VIN T SFI (1999)
9.
If vehicle is equipped with optional anti-theft OR build date is after 4/1/1999, proceed to Step 11. If vehicle is NOT equipped with anti-theft AND
build date is 4/1/1999 or earlier, check for a possible open 4-pin gray harness connector with three (3) wires (RD, RD/BK, and BK) inside the
front door (Figure 4).
10.
If found, remove and discard the connector by cutting the wires, then seal the exposed ends with heat-shrink tubing.
11.
Reinstall watershield and door trim panel.
12.
Repeat above Steps on the opposite front door:
PART NUMBER
PART NAME
XF5Z-14529-DAC
Window Switch Assembly - LH (Mink
With Manual Quarter vent)
XF5Z-14529-FAA
Window Switch Assembly - LH (Mink
With Power Quarter vent)
XF5Z-14529-DAD
Window Switch Assembly - LH
(Portland Gray With Manual Quarter Vent)
XF5Z-14529-FAB
Window Switch Assembly - LH
(Portland Gray With Power Quarter Vent)
XF5Z-14529-CAA
Window Switch Assembly - RH (Mink)
XF5z-14529-cAB
Window Switch Assembly - RH
(Portland Gray)
OTHER APPLICABLE ARTICLES: NONE
SUPERSEDES: 99-24-5
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
OPERATION
DESCRIPTION
TIME
000506A
Adjust Bellcrank And
0.7 Hr.
Replace Window Switch
(Includes Time To Discard
Wire Connector And Seal
Exposed Wire Ends) -
Both Doors