Villager V6-201 3.3L SOHC VIN T SFI (1999)
7. Reinstall the special tool. Apply and maintain maximum vacuum.
8. Cycle the steering wheel fully to the left and right every 30 seconds for approximately five minutes.
CAUTION: Do not hold the steering wheel against the stops for more than three to five seconds at a time. Damage to the power steering pump
can occur.
9. Stop the engine, release the vacuum, and remove special tool 416-DO02 (D95L-7559-A).
10. Install the reservoir cap.
11. Check for fluid leaks at all of the connections. If the power steering fluid shows signs of air, repeat this procedure.
