mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

A/T Shift Cable - Gear Whine Noise|Page 4373 > < Transaxle - Gear Whine Noise|Page 4367
Page 1
background image

Shift Cable: Customer Interest
A/T Shift Cable - Gear Whine Noise

Article No.
01-5-7

March 19, 2001

^

NOISE - GEAR "WHINE" HEARD IN PASSENGER

^

COMPARTMENT

^

TRANSAXLE - GEAR "WHINE" NOISE HEARD IN

^

PASSENGER COMPARTMENT

MERCURY:
1999-2001 VILLAGER

This article is being republished in its entirety to update the model years affected.

ISSUE

Some vehicles may exhibit a gear "whine" noise from the front under light acceleration while driving between 40 km/h (25 mph) and 113 km/h (70 mph).
This condition may be due to the Automatic Transaxle (A/T) shift cable transmitting normal operational noise from the transaxle into the passenger
compartment.

ACTION

Install a 300 gram mass damper on the A/T shift cable to reduce the amount of noise transmitted to the passenger compartment. Refer to the following
Service Procedure for details.

SERVICE PROCEDURE

1.

Road test the vehicle to confirm a gear whine noise is heard.

A/T Shift Cable - Gear Whine Noise|Page 4373 > < Transaxle - Gear Whine Noise|Page 4367