Villager V6-201 3.3L SOHC VIN T SFI (1999)
Transmission Mount: Service and Repair
Front
Removal
1. Raise and support the vehicle.
2. Remove the engine splash shield.
3. Support the transaxle using a suitable jack.
4. Remove the transaxle support insulator bolts.
5. NOTE: The transaxle may need to be slightly lowered to remove the support insulator.
Remove the front transaxle support insulator.
1
Remove the through bolt.
2
Remove the support insulator.
Installation
1. NOTE: The transaxle may need to be slightly lowered to install the support insulator.
Install the support insulator.
1
Install the support insulator.
2
Install the through bolt.