Villager V6-201 3.3L SOHC VIN T SFI (1999)
Transmission Mount: Service and Repair
Rear
Removal
1. Raise and support the vehicle.
2. Support the transaxle using a suitable jack.
3. Remove the lower rear transaxle support insulator nuts.
4. NOTE: The transaxle may have to be lowered to gain clearance to remove the support insulator.
Remove the lower rear transaxle support insulator.
1
Remove the through bolt.
2
Remove the insulator.
Installation
1. NOTE: The transaxle may have to be lowered to gain clearance to install the insulator.
Install the lower rear transaxle support insulator.
1
Install the insulator.
2
Install the through bolt.