Villager V6-201 3.3L SOHC VIN T SFI (1999)
9.
If vehicle is equipped with optional anti-theft OR vehicle build date is after 4/1/1999, proceed to Step 11. If vehicle is NOT equipped with
anti-theft AND build date is 4/1/1999 or earlier, check for a possible open 4-pin gray harness connector with three (3) wires (RD, RD/BK, and
BK) inside the front door (Figure 4).
10.
If found, remove and discard the connector by cutting the wires, then seal the exposed ends with heat-shrink tubing.
11.
If the vehicle WAS built between 10/30/00 and 9/5/01, inspect inside the door for the wiring harness contacting the door check strap while
opening and closing the door (Figure 5). If wiring damage is found, repair as necessary. If the vehicle WAS NOT built between 10/30/00 and
9/5/01, proceed to Step 13.
