Villager V6-201 3.3L SOHC VIN T SFI (1999)
6.
Push and hold the lock knob in the locked position (Figure 2).
7.
Tighten the lock rod bellcrank bolt to 5 N.m (44 lb-in).
8.
Remove and replace the power window switch assembly (refer to Parts Block at the end of this article).
NOTE
ENSURE THE REPLACEMENT WINDOW SWITCH HAS A BUILD DATE CODE OF 9186 (186TH DAY OF 1999) OR LATER. THE BUILD
DATE CODE CAN BE FOUND AT THE BOTTOM OF THE WHITE OR YELLOW STICKER ON THE SIDE OR TOP OF THE SWITCH
(FIGURE 3). STOCK AT THE PARTS DEPOTS HAS BEEN PURGED OF SUSPECT PRODUCTION.
