mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Shop Manual Revisions|Page 984 > < Shop Manual Revisions|Page 982
Page 7
background image

Pinpoint

Test  G

Exhaust Gas Recirculation (EGR) Systems

7.

The EGR valve operates only at part-throttle mode; thereafter, it must remain closed at the cranking mode, the closed throttle mode, and the wide
open throttle mode.

8.

The EGR valve assembly (9F483) is not serviced as released. The EVP sensor (9G428) and EGR valve (9H473) are to be serviced separately.

DIAGNOSIS The diagnosis for this valve system is part of the EEC System diagnosis. Perform Diagnosis after doing the Valve Leakage Test below.

*VALVE CLEANING PROCEDURE: Clean inlet and outlet ports with wire brush or scraper. Do not use 

sandblasting or gasoline or other solvents to clean the EGR valve be- 

Shop Manual Revisions|Page 984 > < Shop Manual Revisions|Page 982