Zephyr L4-140 2.3L SOHC (1983)
Headlamp Switch: Service and Repair
Headlamp Switch
EXC. 1985-88 THUNDERBIRD & COUGAR
1.
Disconnect battery ground cable.
2.
Remove control knob and shaft assembly, by placing knob in full ``On'' position, then pressing knob release button on switch and pulling out knob
and shaft, Fig. 2. To gain access to the release button on Fairmont and Zephyr models with air conditioning it may be necessary to first disconnect
the left A/C duct.
3.
On all models, remove bezel nut. Disconnect multiple plug connector, vacuum hoses if vehicle is equipped with headlight doors and remove
switch.
4.
Reverse procedure to install. Install knob and shaft by inserting shaft into the switch until a distinct click is heard. In some instances it may be
necessary to rotate the shaft slightly until it engages the switch carrier.
