Cooper (R50) L4-1.6L (W10) (2002)
/l4-1.6l_(w10)/Page-588001.png)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Removing And Installing Or Replacing Vibration Damper
Special Tools Required:
^
11 2 150
^
11 8 241
^
11 8 242
^
11 8 270
^
11 8 310
^
11 8 320
Remove road wheel.
Refer to Removing or installing front or rear wheel.
Remove wheel arch cover.
Refer to Removing and installing/replacing front left or right wheel arch cover.
Remove auxiliary drive belt.
Refer to Replacing alternator drive belt.
Using special tool 11 2 150 and special tool 11 8 320 remove vibration damper retaining bolt.
Insert special tool 11 8 270 and tighten.
Install hint: Crankshaft pulley retaining bolt.
Tightening torque, Dampner ........................................................................................................................................................................... 115 Nm
