Cooper (R50) L4-1.6L (W10) (2002)
/l4-1.6l_(w10)/Page-584006.png)
Install crankshaft.
Mount bottom section of crankcase.
Fit screws 1 to 10.
Tightening torque: 11 11 1AZ.
Fit screws 11 to 20.
Tightening torque: 11 11 2AZ.
Checking axial clearance:
Push onto crankshaft (1) in direction of arrow with plastic hammer at rear and front in order to center guide bearing.
Axial clearance: refer to Technical Data.
Assemble engine.
