Cooper (R50) L4-1.6L (W10) (2002)
Fuel Injector: Electrical Specifications
Fuel Injector Electrical Specifications.
-
Voltage is 12 volts when injector is not active.
-
Resistance (approximately 12 ohms)
-
Power Supply (B+ from Main Relay)
-
Status Request - Fuel Injection Signal (approximately 3.0 ms - 5.0 ms)
-
EMS2000 final stage activation (see graph)
-
Measurement is performed on the negative B- side of injector or trigger pin of EMS2000.
-
EMS2000 pulls voltage to ground causing injector to open.
-
When EMS2000 releases ground, injector closes and voltage spikes due to induced voltage in coil winding.