mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Exterior Moulding / Trim > < Trunk / Liftgate Lock|Specifications
Page 1
background image

Trunk / Liftgate Shock / Support: Service and Repair

51 24 305 Removing And Installing/Replacing Gas Strut For Left Or Right Splitdoor

NOTE:

-

Make a written record of the alignment of the gas pressure support(s) before removing. Right and left gas pressure spring (2) do not match.

-

Slide retaining spring (1) to end of gas pressure spring (2) and lever out gas pressure spring (2) from holder.

-

Repeat procedure at other end of gas pressure spring (2) and remove gas pressure spring (2).

Installation note:

Prior to installing the gas pressure spring, check the secure seat of ball stud (1) on body (2) and split door (3).
Tightening torque 51 24 14AZ.

Exterior Moulding / Trim > < Trunk / Liftgate Lock|Specifications